Even we say that our floors are very clean, but still we don’t know if it is the same with our carpets. There could be a lot of things that might be there without noticing. Some of them could be blood stains, muds, dirt from your shoes or slippers, you spill your coffee or juice and sometimes gums and colors.  


If you are tired of cleaning it by yourself there are many other options that you can think of. Everett Carpet Cleaning gives a good service in cleaning the dust and removing the possible causes of smelly smell coming from your carpet. But if your budget is not that very good for hiring someone. Then, the possible solution to your own problem is to do it by yourself.  

Blotting is a good way of removing common stains You may use a very soft clean cloth, it is a good method as well to use a sponge or paper tissues or towels. You really don’t need anything to do except by rubbing it with a little force, in this way it will lose the dirt sticking into it.  

If it is too hard to remove and you are very worried, there could be another way to help you fix it. I don’t know, if you are very familiar with club soda. A lot of housewives said that this is the best remedy for juice, coffee and even to wine and beer stains. Just make sure that you use the right amount and be careful in using it. You would need again a clean piece of cloth and then pour some soda club to the towel and then slowly blot it to your carpet. You may want to mix a little vinegar to it and put it in a bottle spray and use it now. Another tip to use it, is to let it soak to the carpet and wait for about 30 minutes. After that, scrub a little and then if it is fully out, rinse the part with a lukewarm water. Damp it with a clean towel or paper tissue after.  

If you are a man and you don’t have anything except for your shaving cream, that could be a good alternative for you to apply. One man who accidentally used it said that it can hardly remove all the kinds of stains. Just pour a little to the area where the stain is located. Let is stay there for 30 to 40 minutes. The same thing will happen again, blotting the are softly.  

Common problem now of the most parents is the chewing gum. If this one sticks to the mat, they always have a hard time to get rid of it. One way to this is placing an ice cube to the gum. After that, the chewing candy will be frozen and a little solid now and try letting off from the carpet.  

No matter what happened, if your worry is just dust and small particles, you may use vacuum cleaner to it.  

Read More

2 Methods of Carpet Cleaning 

Living a busy life means it is going to be hard finding time to clean and organize your home. Cleaning and organizing your home is very important for your day to day experience at home with your family. Aside from carpet cleaning is for the appearance of your home, it is most important for the relaxing feeling and comfort it gives you when the surrounding is tidy and organized. 

Clean carpets, according to study is pleasing in the eyes, long lasting and especially very healthy for you and for your family. The most important goal that cleaning your carpet is the satisfaction you get with the details and precision of your own home. 

There are a lot of method and ways in cleaning your carpets at home or in your office; you can try first inspecting the carpets that you want to clean or you think will need cleaning at the moment; you can also try moving the furniture or appliances that are barricading the carpet. You can also try applying residue pre-spray; spot cleaning can also be effective in removing stains that are very obvious from the outside. For fast drying you can also set air movers for rapid drying of carpet; Replace furniture & apply foam blocks to protect; Groom carpet to a nice finish; and Post inspection with customer to ensure complete satisfaction. 

There are other methods of cleaning your carpet at home or in your offices, in some methods you will use certain materials and follow various steps. Professional carpet cleaning companies like use several carpet cleaning methods to clean a home’s carpets. Carpet cleaning methods may be placed in one of two categories: wet cleaning or dry cleaning. Each cleaning method has its own particular advantages and disadvantages. But how do you choose between them? 

However, the most widely use and utilized carpet cleaning technique is the hot water extraction is the method recommended by most carpet manufacturers. This method really provides a thorough rinsing to remove embedded soil. This is known rampantly because of the use of Hydramaster truck mounted, self-contained hot water extraction system, along with its multi-step process to give your carpet the best cleaning possible. Applying of a Fluorochemical protector will help your carpet stay cleaner longer and fresher. Duration of the drying depends on many factors such as a degree of soiling, weather, location, and ventilation, so you will have to carefully lookout for your carpets drying time. 

There is also the hot water soil extraction cleaning method which uses equipment that sprays heated water, sometimes also with added cleaning chemicals. In the context of carpet cleaning, “steam cleaning” is hot water soil extraction cleaning. The water is vacuumed up, along with any dislodged and dissolved dirt. It is even highly recommended by professionals that hot water extraction as the most effective carpet cleaning method which also provides a deeper clean.   

But if not carefully done it can damage man-made carpet fibers and change the characteristics as they are usually set using heat. The natural fiber of the carpets such as wool can shrink, velvet-piled carpets and Berber carpets will become fuzzy. Do not let this happen to your carpets, clean it with care. 

Read More

Advantages of Sandblasting

Sandblasting is highly effective and one of the most ideal methods for the maintenance and cleaning of surfaces. The surface restoration is done by pounding fine grains of sand through the sandblaster’s nozzle, directly to the surface being cleaned, at a very high rate. In need of a piece of equipment such as refurbishing machinery to have it look new once again, we are offering you some of the advantages of sandblasting Columbus. 


Different Applications 

Sandblasting is well-known for its high efficiency when it comes to making it look new and clean. By eradicating impurities, residue, and rust, sandblasting is at its best on leaving the surfaces appear more elegant and brand new. In addition to that, blasting has uses in peening, decorating and deburring, among some other tasks. Aside from the useful work of sandblasting on large scale areas, it can also be useful for tasks that deal with precision parts like small gears. 

Also, sandblasting offers a very effective cleaning approach in order to prime a surface or a portion for painting. As a matter of fact, the blasting takes away rust, decay, layers of old paint and other substances, thus, making the surface look new and restored, and ready for a new coat of paint.   

A Solution That Saves Time 

One of the greatest benefits of sandblasting lies its efficiency and speed. The properties of sand – its fine grade and its made up of small grains – make it a powerful abrasive element. A cleaning job which would normally take hours if done manually or other less efficient methods is decreased to just minutes using the method of sandblasting. Portions with cross-sections of 2 millimeters or more are being sandblasted spontaneously due to the method’s precision and fast rate. 

All of the sandblasting’s different applications can be done easily with fast sweeps of the nozzle. Even complicated mill scale is efficiently and quickly cleaned with the sandblasting’s direct pressure. Sandblasting is also the fastest way to get rid of coatings, strip metals and other paint to bare surfaces. Old paint, corrosion, scale and other surface substances are being taken away in just minutes leaving the areas free from contamination and foreign matter. 

Tough on Rust 

Aside from the multiple usages of the sandblasting, it is also very good in ta king down rust. Rust is the leading cause of damage in our properties as it can quickly spread to other metallic surfaces and ultimately corrode to metal. If not treated the right way, the damage can turn into irreversible which can spread to nearby metals. This is very dangerous with machinery and equipment as it can greatly lead to malfunction of the equipment. Therefore, proper removal of rust from metal surfaces is very critical to making sure that your equipment, machineries and other metallic properties will have a longer lifespan.  

From reclaiming and restoring larger surface scales to cleaning precision parts, sandblasting is a very priceless method to enhance the look and your equipment’s operation, increase the life of your property and most importantly, refinish once-deteriorating areas with less time and effort.  

Read More